Product data sheet
Operation and maintenance
Provenza
LUBE INDUSTRIES Srl Via dell’industria, 4 - Treia (MC) - Italy
Kitchen cabinets, PROVENZA model
This product data sheet complies with the specifications set out by Italian Legislative Decree no. 206 dated 6th September 2005 "Consumer Code".
Door composed of a 22 mm thick frame with a central panel, both in MDF compliant with E1 and US EPA TSCA Title VI for formaldehyde emissions. The central panel can be smooth or with a slatted effect. Everything is then painted with a mixed water (patina) and solvent cycle with a soft transparent acrylic finish (< 5 gloss units) in the following colours: shell white (option W720), almond (option W820), linen (option W770), colonial (option W870), carbon (option W920).
Frame lacquered like the door with central panel consisting of an MDF panel (compliant with E1 and US EPA TSCA Title VI), with blackboard-effect paint.
Frame lacquered like the door. Extra-clear transparent 4 mm tempered glass, bronzed or clear satin effect with optional insertion of a graphite-effect painted metal strut.
Composed of a 22 mm thick MDF panel compliant with E1 and US EPA TSCA Title VI for formaldehyde emissions, painted like framed door.
In aluminium or zamak alloy with galvanic bath in the following finishes: satin nickel, burnished, satin black, cast iron, brown oxidised steel, bronze, black nickel.
Door composed of 22 mm thick MDF panel compliant with E1 and US EPA TSCA Title VI for formaldehyde emissions. Everything is then painted with a mixed water (patina) and solvent cycle with a soft transparent acrylic finish (< 5 gloss units) in the following colours: shell white (option W720), almond (option W820), linen (option W770), colonial (option W870), carbon (option W920).
As for solid doors.
In aluminium or zamak alloy with galvanic bath in the following finishes: satin nickel, burnished, satin black, cast iron, brown oxidised steel, bronze, black nickel.
Door composed of a 22 mm thick frame in solid oak with MDF central panel compliant with E1 and US EPA TSCA Title VI for formaldehyde emissions, both veneered with a "split-oak" effect for the honeyed oak, white oak and grey earth oak finishes and with frame in solid yesquero walnut and MDF central panel compliant with E1 and US EPA TSCA Title VI, veneered with yesquero walnut for the black walnut finish. The central panel can be smooth or with a slatted effect. Everything is then varnished with a solvent cycle, with an open-pore polyurethane acrylic finish and a matt gloss (< 20 gloss units).
Frame veneered like the door with central panel consisting of an MDF panel (compliant with E1 and US EPA TSCA Title VI), with blackboard-effect paint
Frame veneered like the door; extra-clear transparent 4 mm tempered glass, bronzed or clear satin effect with optional insertion of a graphite-effect painted metal strut.
Composed of a 22 mm thick panel in solid wood veneered and painted like the door frame.
In aluminium or zamak alloy with galvanic bath in the following finishes: satin nickel, burnished, satin black, cast iron, brown oxidised steel, bronze, black nickel.
Door composed of a 22 mm thick chipboard panel compliant with E1 and US EPA TSCA Title VI for formaldehyde emissions, solid wood on 4 sides with 20 mm thick solid oak and veneered with "split-effect" oak for the honeyed oak, white oak and grey oak finishes. For the black walnut finish: edged on 4 sides with 20 mm thick solid black walnut wood and veneered with walnut. Everything is then varnished with a solvent cycle, with an open-pore polyurethane acrylic finish and a matt gloss (< 20 gloss units).
22 mm thick frame in solid oak with split-effect oak veneer or in solid black walnut with black walnut veneer. 4 mm thick extra-clear transparent tempered glass, bronzed or light satin effect with optional insertion of a graphite-effect painted metal strut.
As for solid doors.
In aluminium or zamak alloy with galvanic bath in the following finishes: satin nickel, burnished, satin black, cast iron, brown oxidised steel, bronze, black nickel.
25 mm thick plywood panels compliant with E1 and US EPA TSCA Title VI for formaldehyde emissions, bi-laminated on both sides with carbon, ash, jute and pearl white effects and edged with 1 mm thick laser-glued ABS. The shelves are equipped with built-in shelf supports with a locking device.
Consisting of 2.8 mm thick high-density fibre panels with polypropylene veneer compliant with E1 and US EPA TSCA Title VI for formaldehyde emissions.
Made of 38 mm thick panels in composite wood: bi-laminated and edged like drawers; or edged and lacquered like lacquered doors; or veneered, edged with 0.6 mm thick wood and painted like veneered doors.
Laminate top: 38 or 58 mm thick water-repellent chipboard (class E1) painted with high pressure laminate (HPL). For worktops in other materials see useful information.
Made of 18/10 stainless steel sheeting, single mould or with electro-welded bowls, smooth or "embossed" finish.
For sinks in other materials see useful information.
Made of spruce wood or MDF (class E1) veneered with wood (different depending on the model); acrylic/polyurethane painting.
Made of chequered aluminium or painted plastic, it protects the sink cabinet from water leaks.
In shockproof plastic (PVC) material, adjustable in height, the feet are screwed into the lower part of the cabinet by means of special bushings without drilling through the bottom (thus completely avoiding points where dirt can accumulate or water can seep into the drawers and under sinks). They can also be made of aluminium, adjustable and mounted on a special base also made of aluminium.
These can be made of anodised or painted aluminium or in PVC covered with decorated melamine paper with upper and lower rubber gaskets.
Made of rigid plastic material (PVC) with holes in the centre to allow water to drain and protect the cabinet frame.
Made of aluminium or rigid shockproof PVC with laminate decoration.
Made of sheet steel and copper-plated and nickel-plated zamak alloy, corrosion-resistant and adjustable in three directions.
The structure can be made of a 16 mm thick chipboard base (very low formaldehyde emission) with grey laminate veneer and side and back in galvanised and corrosion-resistant painted steel sheet, or it can be entirely made of solid beech and plywood. The drawers slide on full-extraction runners with an interlocking system that prevents going off track and auto-close system engaged in the last 4 cm. In addition, a slow-close system (blu-motion) is supplied as standard.
Made of electro-welded metal wire, they can be plasticised with polymer resin, nickel plated or chrome plated and covered with a transparent plastic sheath (Crominox finish).
Top: can be a chipboard panel (class E1) covered with HPL plastic laminate (see laminate worktop) or veneered with wood and painted with water-based, polyurethane or acrylic paints, or it can be made of crystal, granite or natural stone.
Base and strips: can be made of metal or veneered plywood panels or veneered with different woods depending on the model.
Legs: can be made of metal or solid wood. The painting is done with acrylic/polyurethane products.
Structure: can be in tubular metal coated with thermosetting powders, or in solid wood painted with water-based (impregnating) and acrylic/polyurethane products (base).
Seat and backrest: can be made of synthetic material (methacrylate), solid wood, plywood, upholstered fabric or faux straw.
Consisting of 18 mm thick melamine-faced chipboard panels in accordance with the US EPA TSCA Title VI standard (with very low formaldehyde emission).
The shelves are 18 mm thick and equipped with built-in shelf supports with locking device. They can also be made of tempered glass (6 mm thick), grounded on the edges.
Edge in ABS or Polypropylene (PP) glued with thermosetting polyurethane glues 1 mm thick on the front parts of the unit sides and shelves and 0.5 mm thick on the lower and upper parts of the unit sides and on the sides and rear part of the internal shelves. Made of paper for the non-visible parts of furniture (back).
Consisting of 2.8 mm thick high-density fibre panels compliant with E1 and US EPA TSCA Title VI for formaldehyde emissions, wall units with polypropylene veneers and painted bases and columns.
Laminate worktop: 38 or 58 mm thick water-repellent wood particle board coated with high pressure laminate (HPL). For worktops in other materials, please refer to the "Useful information" section.
In sheet 18/10 stainless steel made using a single-casting or electrically welded tubs, with a smooth or "embossed" finish. For sinks in other materials, please refer to the "Useful information" section.
Faced bracket: melamine faced wood particle board panel (class E1); ABS edging.
Veneered bracket: wood particle board panel (class E1) veneered with "slices" of wood (which vary depending on the model) and lacquered using acrylic/polyurethane products.
In pine wood or MDF (class E1) veneered with "slices" of wood (which vary depending on the model); acrylic/polyurethane lacquering.
In chequered aluminium or lacquered plastic to protect the sink unit from water seepage.
In knock-resistant plastic material (PVC) and height-adjustable, these are screwed to the bottom of the cabinet using special bushing, without requiring any drilling in the lower part of the casing (thus completely avoiding the creation of areas in which dirt may accumulate or through which water could leak into the base and sink cabinets).
They are also available in aluminium and can be adjusted and mounted on a special base structure (also made using an aluminium profile).
These elements may be made using anodised or lacquered aluminium, or PVC coated with decorative melamine foil, and have a rubber seal at the top and bottom.
In rigid plastic material (PVC), drilled in the centre to allow any leaking water to escape and to protect the main cabinet column.
In aluminium or rigid knock-resistant PVC with laminate decoration.
In sheet steel and zamak alloy, copper-plated and nickel-plated for resistance to corrosion; adjustable in three directions.
The structure may consist of a 16 mm thick wood particle base (extremely low formaldehyde emission) faced in grey laminate with side and back panels in galvanised and lacquered sheet steel for protection against corrosion. Alternatively the structure can be made entirely of solid ash and plywood; sliding takes place by means of total extraction runners with a grooved system for anti-detachment locking and automatic closure which is activated in the final 4 cm. The soft-close system (blu-motion) is also supplied as standard.
In electrically welded metal wire; they may be plasticised with polymer resin, nickel-plated or chrome-plated and coated with a transparent plastic sheath (Crominox finish).
Top: may be a wood particle panel (class E1) coated with HPL plastic laminate (see laminate worktop) or veneered with "slices" of wood and lacquered with water-based, polyurethane or acrylic shades, or it may be made using glass, granite or natural stone.
Borders and base structure: these may be made using metal or plywood panels, faced or veneered with "slices" of wood (these vary depending on the model).
Legs: these may be made using metal or solid wood; lacquering is carried out using acrylic/polyurethane products.
Structure: this may be in tubular metal lacquered with thermosetting powders, or in solid wood lacquered using water-based (impregnating) and acrylic/polyurethane products (base).
Seat and Backrest: these may be made using synthetic material (methacrylate), solid wood, plywood, upholstered fabric or simulated wicker.
Note: each type of chair or table is identified at the site of purchase by the relevant adhesive label on the packaging.
For further information, please check the user and maintenance manual provided by GRUPPO LUBE.